Home Screen; Arming And Disarming The System; Silent Exit Delay - DSC WTK5504 Manual Del Usuario

Home Screen

System Status/Away Arm button - when disarmed, indicates that pressing will away arm the system; when
armed, indicates that pressing will disarm the panel.
Stay Arm button - indicates your arming option alternative to the one in the System Status message bar.
Zone Status button - shows open zones or zones in alarm.
Voice Chime button - selects whether the chime will be heard on the keypad, and whether it will be verbal
chime, audible chime or disabled. (This does not affect the system chime status.)
More button - allows you to select Functions, Installer Options, or User Options.
Time/date and temperature - displays time/date; temperature is displayed if a WT4911 outdoor siren is
installed.
Trouble/alarm in memory - only displayed when these conditions are present.
Emergency button - takes you to the screen to choose from Fire, Auxiliary and Panic keys.

Arming and Disarming the System

See also Night Arming (Alexor PC9155 and Impassa SCW9055/57 only) on page 6 and No-Entry Arming on page 7.
Stay Arm (Arming the Perimeter)
Home > Stay Arm
Ask your alarm company if this function is available on your system.
Stay arming bypasses the interior protection (i.e., motion sensors) and arms the perimeter of the system (i.e., doors and
windows).
1. Close all sensors (i.e., stop motion and close doors). The Ready (
2. Press the Stay Arm button (and enter your Access Code) and do not leave the premises.
• The verbal prompt announces "User Arming in Progress". An exit delay period follows.
• During exit delay, the Armed (
The display indicates "Exit Delay in Progress," and the pre-programmed exit delay begins. The exit delay
allows an individual to leave the premises while arming the system for those still on the premises. When the
exit delay expires, a verbal prompt announces "System Armed Stay", the Ready LED turns off, the Armed
LED remains on and the keypad stops sounding to indicate that the alarm system is armed.
NOTE: For SIA FAR listed panels, the Stay Arming exit delay will be twice as long as the Away Arming exit delay.

Silent Exit Delay

If the system is armed using the Stay Arm button or using the "No-Entry" Arming method (see page 7), the audible
progress annunciation (keypad buzzer) is silenced and the exit time doubled for that exit period only (CP-01 versions
only).
NOTE: For non CP-01 versions, Standard exit time is used.
Disarm
Home > Disarm
To disarm the system
When Disarm is selected from the Home screen, or an entry delay begins, a numerical keypad is displayed. Enter your
Access Code in the keypad. If an invalid code is entered, "invalid code" will appear on the screen and an error tone will
sound. Re-enter the correct code.
• The system returns to the Home screen and the red Armed indicator turns OFF.
• The alarm status is momentarily displayed in the status bar and the voice prompt announces "System
disarmed".
• The green Ready indicator turns ON.
3
Figure 1 - Home Screen
) and Ready indicators turn on to visually indicate that the system is arming.
) indicator should be on.