MōDRN Finna HYN-FN2DCB-GY Manual Del Usuario página 7

STEP-BY-STEP ASSEMBLY:
STEP 3:
Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking
3
out. Insert H2 into panel B. Refer to page 5 on how to use the cam lock system. Ensure all
hardware pieces are properly tightened. Make sure the bolts go through the pre-drilled holes
properly. Do not over tighten bolts.
STEP 4:
Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking
4
out. Insert H2 into panel A. Refer to page 5 on how to use the cam lock system.
Ensure all hardware pieces are properly tightened.
7/11