Publicidad
Idiomas disponibles
Idiomas disponibles
DRAWBAR
B (See Fig. 1 D)
1.
Discard adapters provided - not required for drawbar
type B.
2.
Align support assembly pin with hole in drawbar and
hang assembly over the shoulder bolts.
3.
Be sure support assembly is seated properly and secure
with retainer spring supplied.
SHOULDER
BOLTS
SUF
SEMBLY
RETAINER
SPRING
FIG. 1D
oi
DRAWBAR
D (See Figs. 1E)
1.
Slide flanges of support assembly into drawbar slots
first, then, pivot backwards inserting pin into drawbar
pin hole.
2.
Be sure support assembly
is seated properly, then
secure with retainer spring.
"_
SUPPORT
ASSEMBLY
;
7
DRAWBAR
SLOTS
(Drawbar
"A" shown)
INSERT
FLANGES
FIRST INTO
DRAWBAR
SLOTS
J
DRAWBAR
PIN HOLE
FIG. 1E
RETAINER
SPRING
MOUNTING
COVER ASSEMBLY
TO
SUPPORT
ASSEMBLY
(See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
to tractor.
1.
Lift and rotate cover to align cover brackets with support
assembly tubes.
2.
Slide cover assembly down onto the support tubes.
COVER
ASSEMBLY
SUPPORT
ASSEMBLY
03024
Fig. 2
Publicidad
