Descargar Imprimir esta página

BGS technic 72098 Manual De Instrucciones página 3

Juego de limpieza de inyectores y asientos

Publicidad

Idiomas disponibles

Idiomas disponibles

COMPONENTS
1 Helix wire brush 34,9 mm
2 Helix wire brush 30,2 mm
3 Helix wire brush 29,5 mm
4 Helix wire brush 25,1 mm
5 Two stage wire brush 25,4 mm
6 Two stage wire brush 19,1 mm
7 Two stage wire brush 12,7 mm
8 Bore wire brush 17 mm
9 Bore wire brush 15 mm
10 Bore wire brush 10 mm
11 Bore wire brush 19 mm
12 Bore wire brush 12 mm
13 Bore wire brush 8 mm
14 Brush handle, with quick coupler
15 Rigid extension, with quick coupler
16 Flexible extension, with fixing screw
17-22 Cleaning swaps 5-20 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This product is used to clean injector seats and Diesel engines. This set is made for universal use and
it is suitable for most vehicles with Diesel engines.
SAFETY INFORMATIONS
Keep children and unauthorized persons out of work area.
Do not allow children to play with the tool or its packaging
Use the tool only for its intended purpose.
When using the brushes in a drill, make sure that the drill is set to a very low speed (as in
manual mode) and to clockwise rotation. Use only cordless screwdrivers with infinitely variable
speed control.
Remove the ignition key before starting repairs to prevent accidental starting of the engine and
resulting engine damage and injuries.
These instructions serve as brief information and in no way replace a workshop manual.
Please always refer to the vehicle-specific service literature for technical information such as
torque values and information on dismantling and assembly.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Injector Bore & Seat Cleaning Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 72098
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading