EPTA Bonnet Neve SHAPE Instrucciones De Uso Para El Usuario página 81

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
10.5 Electrical connection
An omnipolar disconnector switch must be
installed upstream of the cabinet. This must
have:
• Minimum distance of the contacts of 3 mm
• Adequate breaking power
The disconnector switch must be placed in a
position that makes it easy to operate in
emergency situations (maximum distance of 3
m).
Before connecting the cabinet, ensure that the
supply voltage corresponds to the rating plate
data of the cabinet. To guarantee smooth
operation, the maximum voltage variation must
be between +/- 6% of the nominal value.
10.6 Technical features
The identification plate shows the characteristic
technical data of the cabinet. Its position and
the type of data are shown in "Technical
features" ("Fig. 23").
Wiring diagrams, control instrument calibration
lists, installation instructions and copy of the
Declaration of Conformity are available on the
website https://documents.eptarefrigeration.
com.
The sound pressure level generated by the
operation of the cabinet is lower than 70 dB(A).
The cabinet does not cause harmful vibrations.
10.7 Loading the product
Energise the cabinet to start its cooling cycle,
by acting on the general disconnector switch
mounted on the wall. After about 2 hours it is
possible to load the cabinet.
The cabinet is suitable to maintain the
temperature of the goods and not lower it; the
foods, therefore, must be introduced inside it
only if already cooled to the respective
temperatures of preservation. Products which
have been heated must never be introduced
into the cabinet.
N°DOC. UM000303 REV. "J" - 09/01/24
SHAPE - SHAPE SV
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
In the presence of glass fronts on the cabinet, it
is recommended to load the goods when there
is no customer in the sales area.
In loading the goods, ensure that:
• The load is homogeneous in terms of
dimension and quality of the products
• The goods do not obstruct the correct flow
of refrigerated air ("Fig. 24").
• The superstructure of the cabinet is not
loaded with weights that exceed the
indicated limits ("Fig. 26").
Uniformly distributed maximum permissible
load:
• On the bottom level: 90 kg/m
• On the shelves: 225 kg/m
• On the top glass: 10 kg/m
10.8 Use of cabinet
L Verify the availability of interior fittings
suitable for the display and direct
contact of unpackaged fresh foods.
L
Prior to the first direct contact with
foods, sanitise and cleanse the surfaces
to eliminate any substances relating to
the cabinet production process.
Lighting
Cabinet lighting is controlled by a switch on the
rear of the cabinet.
Auxiliary power sockets (optional)
On request, some auxiliary power sockets can
be positioned on the rear part of the cabinet
base to satisfy various user needs.
25/29
User manual
IT
FR
EN EN
DE
ES
PT
2
2
2