Rosthal PTC-2701L Manual De Instrucciones página 8

CALEFACTOR DE TORRE
C/EFECTO FOGATA
PTC tower heater 2701
• Please read this guidance carefully before using your fan heater, so that you can use it correctly.
• Please keep well with this guidance.
The fan heater of these series adopts heating technology of PTC, it has a high heating efficiency,
centralized heat and extensive usage.
USAGE:
1. Please check before you use:
A: The heating element and electric wire cannot be broken.
B: Please do not use the socket lower than 10A for fear of any accident.
2. Use the fan heater on the flat place to avoid being toppled.
3. Turn on the power switch first，
4.
INTRODUCTION
BRIEF INTRODUCTION OF THE PRODUCT
"O"= OFF，"—"ON；
1. Turn on the power switch, LED display Environment temperature, the
appliance is standby;
2. Press as follows: ON (low heating working), OFF(Fan keep working
for 30 seconds when shutdown the appliance(after heating)；If there is no
operation, 10 minutes later the screen will be quench , any button
operation, the screen will light up again
3. Press ,low heating will be change High heating.
4. Press , swing on right and left, press again to turn off this function,
Long press for 3 seconds to open the flame function. And long press for 3
seconds again to turn off this function
When use remote control, press
to swing on or off.
5. Press to set timer, 1h、2h.....12h; "0" indicates that the timing is
not enabled.
6. Press to set temperature, Temperature range: 15-45℃.
When use remote control to set temperature,
Press to set temperature,Temperature range: 15-45℃.
Set temperature is equal to or lower than Environment temperature,
appliance will stop heating. Set temperature is 1-2℃ higher than
Environment temperature, appliance will low heat. Set temperature is
higher or equal to Environment temperature+3℃, appliance will high heat.
7. When the appliance is tilted or the base is off the ground, then the
power cut off automatic.
8. ECO: Press the "ECO" will enter a default temperature setting of 22 ℃.
For example, Environment temperature is 22 ℃.
8.1. When the difference between the ambient temperature and the set
temperature is greater than 4℃, that is when the ambient temperature is
lower than 18℃, the unit will be high heating working.
8.2. When the difference between the ambient temperature and the set
temperature is less than 4℃, that is the ambient temperature is 18-22℃
(including 18 and 22℃), low heating working.
8.3. When the ambient temperature is higher than the set temperature,
that is, when the ambient temperature is higher than 22 ℃ , the fan works
Note: The indicator lights when corresponding function is working.
8
to turn on or off flame; press
INSTRUCTION MANUAL