TOPDON Phoenix Lite 2 Manual De Instrucciones página 31

It needs to be performed in the following cases:
• When the following functions disabled including limiting the vehicle speed, not
waking up the door opening network, and disabling the remote control key, etc. in
order to reduce the power consumption.
3.20 A/F (A/F Reset)
This function can set or learn Air/Fuel ratio parameters.
3.21 STOP/START (Stop/Start Reset)
This function can open or close the automatic start-stop function via setting the
hidden function in ECU (provided that the vehicle has a corresponding hidden function
supported by hardware).
3.22 NOX (NOx Sensor Reset)
This function can reset the catalytic converter learned value stored in the engine ECU.
It needs to be performed in the following cases:
When the NOx fault is re-initialized and the NOx catalytic converter is replaced.
•
3.23 ADBLUE (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset
operation is required.
3.24 SEATS (Seat Calibration)
This function can match the seats with memory function that are replaced and repaired.
3.25 COOLANT (Coolant Bleeding)
This function can activate the electronic water pump before venting the cooling system.
3.26 TYPE (Tire Reset)
This function can set the size parameters of the modified or replaced tire.
3.27 WINDOWS (Windows Calibration)
This feature can perform door window matching to recover ECU initial memory, and
recover the automatic ascending and descending function of power window.
3.28 LANGUAGE (Language Change)
This function can change the system language of the vehicle central control panel.
29