JBM 53873 Manual De Instrucciones página 3

REF. 53873
EN
INSTRUCTION MANUAL
PARTS NAME
1 Collection bowl
2 Stand bar
3 Lock screw
4 Oil tank
5 Air inlet unit
6 Oil drain pipe
TECHNICAL PARAMETERS
• Working pressure: 1-3BAR
• Tank capacity: 70L
• Collection strainer capacity: 10L
• Weight: 18KG
THE OPERATING INSTRUCTIONS
OIL COLLECTION
1. Lift the vehicle to proper height. Move the oil extractor
below the car engine. The oil tray position has to be
right under the vehicle oil drain hole.
2. With the height set and ensuring the insert grille is in
place, open the in-line ball valve. Waste oil now can be
collected.
EMPTYING THE WASTE OIL
1. When the tank is full, it must be emptied. This operation
should be carried out carefully to avoid spillage, etc.
Ensure valve is closed before connecting the airline to
the inlet.
2. Place the outlet hose into a suitable container for
collection/ disposal
Note:
Do not release waste oil into the environment.
Now carefully open valve slowly to begin transfer. When
completed close valve and the other valve before disconnec-
ting the aire supply form inlet.
1. Do not extract flammable liquids;
2. When extracting high temperature oils, keep hands and
face well protected;
3. Never fill the reservoir over the maximum level indica-
ted on the gauge;
4. Check whether the pumping oil tube is clogged.
MAINTENANCE INSTRUCTIONS
1. Regularly check the equipment for leakage oil, if there
is any should be immediately overhauled;
2. Always check the hose connection is sealed;
3. Oil storage tank should not be long-term storage of
waste oil, so as not to corrosion oil drums;
4. Equipment surface should always be wiped clean, keep
the pumping unit clean, run out of the device, please
place in the shade to avoid direct sunlight.
WARRANTY INSTRUCTIONS
In order to protect your enjoyment of satisfactory service,
the company to develop after-sales service, if you have
any questions, comments or suggestions, please contact
our agents, we are happy to listen to your views and make
possible answer!
Warranty service is limited to your normal use under the
effective, everything considered damaged (the user does not
follow the manual normal use, the assembly of non-produc-
tion of the company's accessories, Due to user transport and
other accidents caused by equipment damage, non-approved
by the company's conversion, damage caused by natural
disasters, part overtime warranty period to be updated and
so on) are not within the scope of the warranty, maintenance,
as usual fees.
Warranty certificate must be sealed by the local dealer can
be effective, the user after purchase, have to keep this
warranty.
· 3 ·