Descargar Imprimir esta página

Kenmore 461.99130 Manual Del Usuario página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Before You Call For Service
Problem
Possible Cause
What to do
No Power.
A fuse in yourhome may
Replace fuse or reset clrcutt breaker,
be blown or the circuit
breaker tripped,
Power surge
Unplug the wine cooler, wait a few
seconds and then plug it back In.
Plug not fullyInserted into
Make sure the 3-preng plug on the
wall outlet
wine cooler Is fully inserted intooutlet,
Cabinet Temperature
too High
Temperature setting
Verify the temperature control setting.
Adjust if neccessary
Door not shut properly
or opened excesslvaIy
Ensure Ihat the door Is fully closed
and thai the gasket is sealing
against the cabinet. Open the door
only as needed and for short periods
of tlme.
RecenUy added a large
quantity of warm bottles
to the cabinet
Limit the quantity of warm bottles
being introducedto the cabinet at the
same time Attempt to phase tn the
load IntroducJJonif possible°(i.e. load
no more than 6 warm bottles at once-
3 per compartment)
"C|lcklng" Noise
CondensaUon on the
cabinet endlor doors
Normaf sound
High humidityconditions
in the home
No user intervention ls required as
thissound is normal during the opera-
tion of the appliance Thts audible
'clicking' noise may be heard as the
wine cooler ends or begins a cooling
cycle.
The condensation wil! subside once
humidity conditionsreturn to normal
Door not shut properly
or opened excessively
Ensure that the door ts fully closed
and that the gasket Is sealing
against the cabinet. Open the door
only as needed and for short periods
of time.
If none of the above reclines the situationplease contact our customer care depart-
ment at 1-800-4MY-HOME (1-800-469-4663)
10

Publicidad

loading