Installation
Installation
Before first use, remove the PVC film from the cooking plate and drip tray.
Place the appliance on a solid, flat, heat-resistant surface. For optimum user comfort,
the appliance must be located between 85 and 95 cm from the ground.
If this appliance must be placed in close proximity to a wall, partition, kitchen furniture,
decorative borders, etc.,they should be of non-flammable material. If not, they should
be covered by appropriate heat insulating, non-combustible material, with particular
attention paid to fire prevention regulations.
Assemble the drip tray handles as shown in the diagram below :
Place the filter in the drip tray to capture cooking run-off (Design and Club models).
Protective lid (Club model)
Assemble the protective lid as shown in the diagram below :
Set the plancha in a sheltered location, away from wind and draughts.
The lid will protect your appliance from the elements. Ensure the lid is open before
using the plancha. Do not close the lid during cooking.
- 18 -