Publicidad
Idiomas disponibles
Idiomas disponibles
Using t he appropriate
grinder, wheel and dust e xtractor vacuum i tcan
beused toremove thevast m ajority ofstatic a nd airborne dust w hich
without theuseofthe tuckpoint shroud c ould o therwise contaminate
theworking e nvironment
or pose an increased health riskto the
operator and those inclose proximity.
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
The tuckpoint shroud is a professional tool. DO NOT let children come
into contact with the tool. Supervision is required when inexperienced
operators use this tool.
Recommended
power tools to be used with this attachment
are
available at extra cost from your local dealer or authorized service
center. If you need assistance in locating any power tool, please
contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore,
MD 21286,
call 1-800-4-DEWALT
(1-800-433-9258)
or visit our
website www.dewalt.com.
FIG.1
F
G
B
ASSEMBLY
AND ADJUSTMENT
(FIG.
1, 2)
A WARNING: To reduce the risk of injury, ALWAYS turn off the
tool and disconnect the tool from the power source before
making any adjustments or removing or installing attachments
or accessories. This applies to both the grinder and the dust
extractor vacuum. Such preventative safety measures reduce the
risk of starting the tool accidentally.
Mounting
and Removing
Tuckpoint
Shroud
NOTE: The tuckpoint shroud is only recommended for use with the
DWE46102 heavy-duty small angle grinder.
1. Follow the mounting and removing guard instructions in the tool
manual to remove the guard from grinder (DWE46102).
2. Open the clamp lever (G) on the tuckpoint shroud and align the
tabs (I) on the tuckpoint shroud with the slots (J) on the grinder
gear case.
FIG. 2
3. With the clamp lever open, rotate the shroud into the desired
working position. The shroud should be positioned between the
spindle and the operator to provide optimum efficiency.
Publicidad
