Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
Do not press the punctured site against the test strip or try to smear the
blood.
If you do not apply a blood sample within 3 minutes, the meter will
automatically turn off. You must remove the test strip and insert it back into
the meter to start a new test.
The confirmation window should be filled with blood before the meter begins
to count down. NEVER try to add more blood to the test strip after the drop of
blood has moved away. Discard the used test strip and retest with a new
20
2. Obtaining a blood sample
Use the pre-set lancing device to
puncture the desired site. Wipe off the
first appeared drop of blood with a
clean cotton swab. The size of the
drop should be at least 3 microliter
(μL) for a total cholesterol test. Gently
squeeze the punctured area to obtain
another drop of blood. Be careful NOT
to smear the blood sample.
3. Bring strip to sample
While holding the meter in an angled
position with the strip facing down,
gently bring the strip to the sample so
that the absorbent hole can sip in the
blood. Confirmation window should be
completely filled if enough blood
sample has been applied. Do NOT
remove your finger until you hear a
beep sound.
Publicidad
