Braun BC21 Instrucciones Para El Usuario página 2

English
Battery precautions
1. Do not use rechargeable batteries.
2. Use only 3V, CR2032 battery of the same or equivalent type.
3. Insert batteries with the correct polarity.
4. Keep batteries away from children.
5. Dispose of exhausted batteries according to local legal require-
ments. Do not dispose them by throwing away with normal
household rubbish.
6. Avoid short circuiting the contacts in the battery compartment
and battery terminals.
7. Remove batteries from the unit if it will not be used for long
period of time.
8. Exhausted batteries should be removed from the battery com-
partment to prevent over-discharge, which can cause leakage
and may cause damage to the clock.
Getting started
1. Remove the battery door.
2. Take out button cell battery and remove the plastic strip.
3. Replace the button cell battery for time backup.
4. Close the battery door.
5. An AC/DC adapter is being used to power the clock, plug the
adapter into the USB-C jack at the back of the clock.
Function keys
Alarm/time/12/24 hour/brightness switch
- Slide to the alarm position to set the alarm time
- Slide to the time position to set the clock time
- Slide to the 12/24 hour position to set 12/24 hour format
- Slide to the brightness position to set the clock display bright-
ness.
+ key
- In the alarm/time setting mode, press to increase the setting
value. Press and hold to speed up the setting.
- In the 12/24 hour setting mode, press to switch between 12/24
hour format.
- In the brightness mode, press to increase the clock display
brightness.
- key
- In the alarm/time setting mode, press to decrease the setting
value. Press and hold to speed up the setting.
- In the brightness mode, press to decrease the clock display
brightness
ALARM ON/OFF button
- Press to turn the alarm on/off.
Snooze zone
- Touch to stop the alarm and activate the snooze function.
Reset button
- Press by using a pin to reset all values to default. In case of a
malfunction, the unit has to be reset.
Product description
1. LCD display
2. Alarm/time/12/24 hour/brightness switch
3. USB-C
4. Backup Battery compartment
5. Reset button
6. Alarm ON/OFF button
7. Snooze zone
8. – key
9. + key
10. Wireless charging pad
Display symbols
A. Time
B. Alarm icon
C. Alarm time
D. Charging indicator
Setting the time
1. Slide the "ALARM / TIME / 12/24 HOUR / BRIGHTNESS" switch
to the TIME position.
2. Press the "+" or "-" key to set the desired value. Press and hold
to speed up the setting.
3. Slide the "ALARM / TIME / 12/24 HOUR / BRIGHTNESS" switch
to the "BRIGHTNESS" position to return to normal display and
save the setting.
Setting the alarm
1. Slide the "ALARM / TIME / 12/24 HOUR / BRIGHTNESS" switch
to the ALARM position.
2. Press the "+" or "-" key to set the desired value. Press and hold
to speed up the setting.
3. Slide the "ALARM / TIME / 12/24 HOUR / BRIGHTNESS" switch
to the BRIGHTNESS position to return to normal display and
save the setting.
Setting the 12/24 hour format
1. Slide the "ALARM / TIME / 12/24 HOUR / BRIGHTNESS" switch
to the 12/24 HOUR position.
2. Press the "+" key to set the 12 or 24 hour format.
3. Slide the "ALARM / TIME / 12/24 HOUR / BRIGHTNESS" switch
to the BRIGHTNESS position to return to normal display and
save the setting.
Setting the clock display brightness
The clock will automatically adjust the display brightness depend-
ing on the surrounding level of light.
1. In a well-lit environment, slide the "ALARM / TIME / 12/24 HOUR
/ BRIGHTNESS" switch to the BRIGHTNESS position.
2. Press the "+" or "-" key to set the desired brightness.
3. In a dark environment (or by covering the sensor), slide the
"ALARM / TIME / 12/24 HOUR / BRIGHTNESS" switch to the
BRIGHTNESS position.
4. Press the "+" or "-" key to set the desired brightness.
Using the alarm and snooze function
1. Activate the alarm by pressing the "ALARM ON/OFF" button.
The bell icon " " will appear on the LCD display.
2. Press the SNOOZE zone to stop the alarm and activate the
snooze function. When the alarm sounds, the alarm icon will
flash.
3. To de-activate the alarm and snooze function, press the ALARM
ON/OFF button. The bell icon will disappear.
Note:
When the snooze function is activated, the alarm will automat-
ically start again after 5 minutes. The snooze function will not
stop unless you press the ALARM ON/OFF button to turn off the
snooze.
Using the wireless charging function
Place your Qi compatible device on the centre of the wireless
charging pad. The charging icon will appear on the LCD display
when the device is charging.
Note: The wireless charging function may not work with all phone
cases. For maximum charging efficiency, the device must be
aligned with the centre of the charging area, which is marked with
'charge' text. No metal case or foreign objects should be placed
between the device and the charging pad.
Battery replacement
1. If the AC/DC adapter is removed from the clock and plugged
back in and the current time is not memorised, then the button
cell battery must be replaced immediately.
2. It is recommended to replace the button cell battery once a
year.
Note: Exposure to an electrostatic environment may cause the
clock to reset. In this event please follow the instructions as de-
scribed in this manual to set the clock again.