Sinji SIBF-0106 Manual página 5

1. User instructions
Before first use: remove any packaging and protective films, also check for damages.
There are two ways to control the Sinji Hot & Cold Bladeless Fan. You can either use the touch
button (LCD screen) or the remote controller. In the table below you can find the controls and
functions.
Note: For every time a setting is changed, for example "fan speed +1", the Sinji Hot & Cold
Bladeless Fan will make a single beeping sound. If the limit of a setting is reached it will quickly
beep twice. Unless the sound has been manually turned off.
Remote symbol Function
When off: turn on
When on: turn off
Turn on/off swing mode
Switch to cooling mode
1
Increase fan speed by one
1
Decrease fan speed by one
2
Switch to hot mode
2
Increase hot fan speed and temperature
2
Decrease hot fan speed and temperature
Increase countdown timer by 1 hour
1
Max. fan speed
1
Sleep mode, lowest fan speed
Turn beep sound on/off
1These buttons only work while in fan mode.
2These buttons only work while in hot fan mode.
LCD
When off: Black
When on: Fan speed (default 5 or
previous speed). Screen turns of after 30
seconds
-
Fan speed. Screen turns of after 30
seconds.
1/2/3/4/5/6/7/8/
8/7/6/5/4/3/2/1
Blinking fan speed. Screen turns of after
30 seconds.
1/2/3
3/2/1
1/2/3/4/5/6/7/8/9/0 (0=off)
H
L
-
EN