Panasonic ER412N Manual De Instrucciones página 4

Parts identification
(See fig. 1)
A Protective cap
B Outer blade
C Outer blade frame
D Inner blade
E Joint
F On/off switch
Slide the switch upward to
turn the trimmer on.
G Body
H Battery cover
Replacing battery
(See fig. 2)
Turn the battery cover counter clock-
wise and match the line a with b
and pull to remove. Insert one AA
(R6) battery. To replace the battery
cover, reverse the above procedure.
Using your trimmer
Turn on the switch and carefully in-
sert the tip of the outer blade into your
nostril or an ear hole to trim the nose
and ear hairs.
Maintenance
Be sure that the switch is turned off
before removing, replacing or clean-
ing the blades.
To remove the outer blade frame,
turn it and match the line c with d
and pull upward. (See fig. 3)
Detach the inner blade from the outer
blade. Wipe the blades with a tissue
to remove any cut hairs, dust, etc.
THE WHOLE UNIT CAN BE
WASHED IN WATER.
DO NOT USE BOILED WATER.
Next, put the inner blade back into
the outer blade. To replace the outer
blade frame to the body, match the
mark c with d, and turn clockwise
until it clicks in.
Caution
Do not insert the device further into
your nostril or an ear hole than the
narrow tip on the outer blade. Also,
do not press the trimmer forcefully
into your nostril, or an ear hole.
Do not attempt to use the device if
the outer blade frame or blades are
deformed or damaged, as injury to
your nostril or an ear hole may oc-
cur.
This trimmer is designed only for
cutting nose or ear hairs. Do not at-
tempt to use it for any other purpose.
The blades have been precision
manufactured. Do not subject them
to excessive force, impact, etc.
Be sure that the switch is turned off
before attempting to clean the
blades. If used once a week for
approx. 1 min. at a time, the life of
the blades is approx. 3 years.
Since it may lead to unexpected
problems and accidents, do not at-
tempt to modify or disassemble and
repair the trimmer yourself.
Do not wipe it with thinner, benzine
or alcohol. Clean it by cloth with
soapy water.
READ ALL INSTRUC-
TIONS BEFORE USE.
4