Publicidad
Idiomas disponibles
Idiomas disponibles
14 | English
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 81 dB(A); sound power
level 89 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2
2
a
= 3.8 m/s
, K = 1.5 m/s
,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
Selecting the Sanding Sheet
Different sanding sheets are available, depending on the material you are working with and the required surface removal rate:
Material
– Paint
– Varnish
– Filler
– Bodyfiller
Expert for Wood
– All wood and wood-based ma-
terials (e.g. hardwood, soft-
wood, chipboard, construction
boards)
Best for Wood
– Hardwood
– Chipboard
– Construction boards
– Metal materials
– Car paint
– Stone
– Marble
– Granite
– Ceramic
– Glass
– Perspex
– Fibreglass reinforced plastics
1 609 92A 8DA | (17.05.2023)
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Application
For sanding down paint
For sanding undercoats (e.g. removing brush-
strokes, paint drips and paint runs)
For final sanding of primers prior to painting
For pre-sanding, e.g. of rough and uneven
beams and boards
For surface sanding and levelling of slight irreg-
ularities
For finish-sanding and fine sanding of wood
For pre-sanding
For shaping and edge chamfering
For fine sanding during shaping
Buffing and edge rounding
Grit
Coarse
40
60
Medium
80
100
120
Fine
180
240
320
400
Coarse
40
60
Medium
80
100
120
Fine
180
240
320
400
Coarse
80
Medium
100
120
Fine
180
240
320
400
Very fine
600
1200
Bosch Power Tools
Publicidad
