Publicidad
Idiomas disponibles
Idiomas disponibles
USE THE HEATER.
OPERATING INSTRUCTIONS:
1. The door of the room must be closed for greater efficiency.
2. The room should not exceed 10 square meters.
3. Plug in the heater.
4. Turn the control button to one of the following positions:
5. Adjust the temperature of your desired level using the button of the thermostat.
6. When the room has reached the desired temperature, turn the thermostat knob
counterclockwise just to the point where the unit turns off and leave it at that point.
The temperature will be set that way and will automatically be regulated thanks to the
thermostat.
IMPORTANT SECURITY INSTRUCTIONS.
⚫
In case of overheating, there is a safety system that automatically shuts off the heater.
After a cooling phase, the apparatus will be ready again for use.
⚫
If you feel that the above problem continues, unplug the appliance and consult your
authorized dealer or Technical Assistance service.
⚫
While in operation, do not touch or cover the air outlet or the air inlet.
This can cause the unit to overheat and the safety system to start functioning.
MAINTENANCE.
- Your heater must be unplugged from the electrical power before cleaning.
- Clean the device with a lightly moistened cloth or brush or duster to remove dust.
- Never use abrasive or flammable products to clean the appliance.
- Never immerse the heater in water.
- Clean the air inlet and outlet regularly with a vacuum cleaner. - If you are not going to use
your heater for a long period of time, store the heater in a cool, dry place where it does not
pick up dirt or dust.
Publicidad
