Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Installation
Television Location
This unit can be used as an entertainment center. Consult your dealer for available options.
O
Avoid excessive sunlight or bright lights, including reflections.
O
Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
O
Fluorescent lighting may reduce Remote Control transmitting range.
O
Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
O
Use 75-ohm coaxial shielded cables,
O
Check type of output and input connectors on your components.
O
Determine required cable lengths.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE APLUG WITHA
t=
RECEPTACLE
OR OTHER
OUTLET
UNLESS
THE BLADE
CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
FOR SOME MODELS THAT ARE
Potarized plug
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Cable / Antenna 1 and 2
For proper reception, either a cable or antenna connection is required.
Cable Connection
Incoming Cable from
,
Cable Company
Connect the cable supplied by your local cable company.
Note:
A cable converter box may be required for proper reception.
(y
Check
with
your
local
cable
company
for compatibility
C COD
7
back of TV
Antenna 1 and 2 Connections
mee
e
For proper reception of VHF/UHF
channels,
an external antenna
is
required. For best reception an outdoor antenna is recommended.
.
To use Antenna 1 and Antenna 2, select TV Mode in the
Incoming Cable trom
Set UP menu under Prog. Chan.
AA
@
y
TI?
=y/7 Cable Preset
Cable
Mode
is preset
at the
factory.
Antenna users must change to TV Mode in
the Set Up Menu.
Publicidad
