Publicidad
Idiomas disponibles
Idiomas disponibles
8. Fix the grill rack on top.
A1. Short pipe
A5. Butterfly nut
STAND ASSEMBLY
1. Fix part A1 into A2 as above picture
2. Using Screw M5 to fix through A3&A3 together with the party did from above process, then using A5 for
fixing.
3. Finishing all assembling with all other 3pcs of stands as above process, finally completing with fittings as
above picture.
4. Fix up the finished BBQ unit as instruction 'BBQ assembly" on top of above stand party A8.See picture
above.
5. Let the grill heat up for a moment without any food on the rack. This will reduce the smell when first
switching on a new grill (a slight smell and a little smoke may be emitted, ensure sufficient ventilation).
HOW TO USE YOUR BARBECUE
1. Insert the plug into the mains supply socket.
2. Set the thermostat control knob to its 'Max.' position. The indicator light turns on, and the heating
element is permanently switched on.
3. When it is first switched on, the grill may emit a new smell. A small amount of smoke may also be
noticeable. We therefore recommend you to heat up the barbecue for about 5 minutes without any food
stuffs.
4. After approximately 5-10 minutes, the heating element reaches the right temperature for grilling. When
you grilling the food stuffs, you can turn the thermostat control knob back to a lower position and/or
A2. Long pipe
A6. M5 screw
10
A3. Short metal shelf
A7. Fitting
A4. Long metal shelf
A8. Small grill
Publicidad
