GB | Thermometer
The thermometer measures indoor and outdoor temperature.
Technical parameters:
Thermal range:
Indoor temperature (IN) 0 °C to 60 °C
Outdoor temperature (OUT) -40 °C to 60 °C
Measurement precision: ±1 °C
Thermal resolution: 0.1 °C
Thermal probe: outdoor, waterproof
Length of the thermal wire probe: 2 m
Power supply: 2× 1.5 V AAA
Installing the battery
1. Remove the battery cover on the rear side of the appliance.
2. Insert two 1.5 V AAA type batteries. Follow the polarity as indicated on the bottom of the battery
compartment. Use alkali batteries only. Do not use rechargeable batteries.
3. Close the battery compartment.
Indoor and outdoor temperature
1. Outdoor temperature is shown in the upper half of the display in the OUT field.
2. Indoor temperature is shown in the lower half of the display in the IN field.
Care and maintenance
The product is designed so that with proper use it can serve reliably for many years. There are several
guidelines for correct operation:
• Before you start using the product, read the user manual carefully.
• Do not put the product in direct sunlight, extreme cold or moisture and sudden temperature
change. It would lower the measurement accuracy.
• Do not put the product in locations prone to vibrations and shocks – it could damage the product.
• Do not put the product under excessive pressure, shocks, dust, high temperature or moisture – it
might harm the product functionality, deplete its energy, damage the batteries or deform the
plastic components.
• Do not put the product on rain or in moisture, unless it is designed for exterior use.
• Do not place any sources of open fire, on the product, such as a burning candle.
• Do not put the product in places with insufficient airflow.
• Do not interfere with the internal electric circuits of the product – you can damage it and render
the warranty invalid. The product should be repaired only by qualified professionals.
2