Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
The frame is shipped partially assembled. If exposed to cold temperatures, allow
contents to come to room temperature before completing assembly. Remove contents
from box, making sure you have all parts.
1. Align the toilet seat clamps onto the back frame rail. (Both clamps should sit outside
the pail brackets.) Push down on seat until clamps snap firmly into place.
2. Slide pail in from the front of commode.
Adjusting leg height
1. Before use, adjust height of each leg to your specific needs, making sure all legs are
at the same height. When desired height is reached, lock legs into place by aligning
buttons into proper holes, per Figure 2.
2. Check that the legs are locked into place by pushing down and pulling up on each leg.
NOTE: If any part or mechanism appears to be unsafe or damaged, DO NOT USE.
If you experience problems, please contact Medline at 1-800-MEDLINE (633-5463) |
1-800-268-2848.
Maintenance
Periodic visual inspection of this product is recommended to ensure that all parts and
hardware are secure, that components are in good working order and not cracked,
broken or fractured, and that there are no obstructions or impediments to normal,
safe operation. If any part or mechanism appears to be unsafe or damaged, do not use
the product. If you experience problems, please contact Medline at 1-800-MEDLINE
(633-5463) | 1-800-268-2848.
Cleaning
1. Clean with regular household cleaning products. Use a non-abrasive cleaner with
warm water. Wipe dry after cleaning.
2. DO NOT use abrasive powders, cleaners or scouring pads.
V1 012022 | PIC-00244
3
Publicidad
