Publicidad
Idiomas disponibles
Idiomas disponibles
10. NAPE:
- Use your fingers to lift the hair from the base of the head up the neck.
- With the other hand, hold the personal trimmer at the base of your neck with the cutting unit
facing up and move the trimmer until it touches the finger covering the hair roots at the base
of the head. Be sure to move it slowly.
11. NOSE:
- Insert the trimmer gently into the nostril.
- Move gently inside and outside the nose and at the same time rotate the device.
- Avoid inserting more than 6 mm into your nostril.
12. TRIMMER DETAIL:
- Start with the edges.
- Use movements to the edge to trim the desired places in the facial area.
TIPS FOR BETTER RESULTS.
- Before starting to cut, comb the beard or mustache and remove tangles.
- To define lines, remove the adapter and cut only with the blade.
- Frequently remove accumulated hairs on the blade or on the adapter.
- Make sure that the battery has enough charge to finish the cut.
CLEANING AND MAINTENANCE
- Clean your machine and the accessories always used after each use.
- Remove any cutting adapter that is placed in the machine.
- Use the cleaning brush to remove hairs from the machine and adapter.
- Once clean, use a little oil to lubricate the blades.
- Do not use abrasive or corrosive cleaning products under any circumstances.
- Do not use fabric cloths or towels to clean the blades or adapters.
STORAGE.
- Before storing, make sure it is clean and the blades are greased.
- Store in a safe and dry place, where it does not carry blows and may be damaged.
- Do not wrap the cable around the appliance.
- Do not store in places near appliances that give off heat.
.
4
Publicidad
