Descargar Imprimir esta página

Jackery Explorer 1000 Plus Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

GB
Charging from the wall
Please use the AC cable included in the package.
Solar charging
Jackery SolarSaga 200 or 100 or 60 Solar Panel Connection Guide
If one or two solar panels are connected, you can directly connect the DC8020 port of the solar
panel to the DC8020 port of Jackery Explorer 1000 Plus for charging. If three or four solar panels are
connected, please refer to the method shown in the following figure to charge through the solar
series connector (Note: The solar series connector is not in standard configuration, so you need to
purchase it separately. Please refer to the detailed operation instructions of the solar series
connector before using it.)
SolarSaga×2
SolarSaga×2
Tip: Jackery Explorer 1000 Pro does not support three Jackery SolarSaga 200 or 100 or 60 solar
panels in single input; otherwise, over-voltage protection will be triggered.
Caution: When the two inputs are used at the same time, please make sure to use the same type of
solar panel and the number of solar panels in the two inputs must be the same to avoid damage or
charging problems of the equipment due to inconsistent voltages of the two channels.
06
AC Charger
Explorer 1000 Plus
AC 220V-240V 10A MAX
DC INPUT
Explorer 1000 Plus
AC 220V-240V 10A MAX
DC INPUT
Explorer 1000 Plus
AC 220V-240V 10A MAX
DC INPUT
SolarSaga×1
SolarSaga×2

Publicidad

loading

Este manual también es adecuado para:

Je-1000c