Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE DEVICE
1.
Heating zone
2.
Switch
3.
Control panel lock
4.
Timer
5.
Setting power and heating
temperature
6.
LCD display
7.
Buttons: „+" and „-" for setting
individual values (power and heating
temperature, time)
METHOD OF USE
1. Put the cooker on a hard, flat and dry surface.
2. Insert the plug of the power cord
3. Put an appropriate cooking pot on the heating plate of the cooker
4. Switch on
and set the following parameters:
w
HEATING POWER:
Select the heating power button
the value adjustment buttons
the faster the device heats up, which appreciably reduces the time of preparation. You
can adjust the power settings at any time during cooking. After selecting the heating pow-
er function, it is not possible to set the temperature function at the same time.
TEMPERATURE:
Select the heating power button
the value adjustment buttons
settings at any time during cooking. After selecting the heating power function, it is not
possible to set the temperature function at the same time.
TIMER:
Select the timer button
buttons
in the scope from 0 to 180 min. After the time set, the cooker automatically
u
turns off.
FUNCTION PANEL LOCK:
After setting the temperature and time of the cooker, the lock button of the function pan-
el may be used
. The lock prevents accidental changes in settings of previously selected
e
parameters.
WARNING! When the heating process is over, take the pot/pan away from the heating zones but
do not unplug the hob from the mains while the fans cooling the inside of the appliance continue
to work. You can safely unplug the hob only after the cooling fans stop.
AUTOMATIC TURN OFF AFTER POTS REMOVAL
Automatic turning off works when lifting or removing pots/pans from the heating plate,
After putting the pot/pan again on the heating plate within 40 seconds, the cooker starts
operating with the same previously set values. When the indicated time is longer, the
cooker automatically turns off.
in the socket.
o
of the device and then set an appropriate value using
t
in the scope from 200 to 1800W. The higher the power,
u
of the device and then set an appropriate value using
t
in the scope from 60 to 240
u
and set the appropriate time using the value adjustment
r
8.
Control panel indicating the readiness
for setting:
a. switching on/off the button lock
b. timer
c. temperature
d. power
9.
Power cord
.
q
C. You can adjust the power
0
EN
23
Publicidad
