Quick Guide - ATL LTE18 kit
Models: ATLGM&EG18-EA (ATL LTE18 kit)
EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.7 or the latest stable version, to ensure compliance
with local authority regulations!
It is the end user's responsibility to follow local country regulations, including operation within legal
frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS)
requirements. All MikroTik radio devices must be installed according to instructions.
This Quick Guide covers the model: ATLGM&EG18-EA (ATL LTE18 kit)
This is a wireless network device. You can find the product model name on the case label
(ID).
Please visit the user manual page on
QR code with your mobile phone.
The most important technical specifications for this product can be found on the last page of this Quick
Guide.
Technical specifications, brochures, and more info about products are at
Configuration manual for software in your language with additional information can be found
at
https://mt.lv/help
If you need help with configuration, please seek a consultant
First steps:
Open the Ethernet port door;
Insert the SIM card into the slot, with the chip facing UP;
Connect the device to the included PoE injector with an Ethernet cable to the data+power end;
https://mt.lv/um
for the full up-to-date user manual. Or scan the
https://mikrotik.com/products
https://mikrotik.com/consultants