Publicidad
Idiomas disponibles
Idiomas disponibles
for water & fire
Adjustment modes and functions
Variable differential pressure
∆p-v (I, II, III,)
PP
= Proportional Pressure
Constant differential pressure
∆p-c (I, II, III,)
CP
= Constant Pressure
Number of constant turns
CS
= Constant Speed
EN
8
MODULEX UPM- Intelligent frequency conversion circulation pump
Recommended in case of heating systems with delivery and return pipes with
radiators, for the reduction of flow noise on thermostatic valves and zone
disconnectors.
The pump halves the delivery in case of flow reduction in the pipeline network
(radiators or closed areas). Electrical energy is saved by adapting the delivery to
the required flow rate and reduced flow speed. Three predefined characteristic
curves including (I, II, III) according to choice.
Recommended in case of radiant panels (floor systems) or large pipes and for
all applications without variable system characteristic curves, (e.g. circulation
in accumulators or heaters) and single-pipe heating systems with radiators.
The regulation maintains the set delivery regardless of the conveyed flow rate.
Three predefined characteristic curves (I, II, III) according to choice.
Recommended for systems with steady resistance that require a constant flow
rate.
(I, II, III,)
The pump operates in three stages corresponding to numbers of preset fixed
laps (I, II, III).
NOTICE
Factory setting: (CS III)
Constant speed, constant curve, speed III
EN
Publicidad
