Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
1. To Attach Battery Pack
a. Align the raised portion on the battery pack
with the grooves in the battery pack port (O),
and then slide the battery pack into the port as
shown.
b. Make sure that the latch on the battery pack
snaps into place and the battery pack is
secured to the battery port before beginning
operation.
NOTICE: When placing the battery pack into the
battery port, be sure that the raised rib on battery
pack aligns with the groove in the battery port and
the latches snap into place properly. Improper
assembly of the battery pack can cause damage to
internal components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
b. Pull the battery pack backward to remove it from the battery port.
WARNING
• Battery tools are always in operating condition. Therefore, always remove the battery pack
when the tool is not in use or when transporting the tower light.
2. Power Button
The power button (N) can be used to turn on/off
the tower light and switch between the brightness
levels.
Each press of the power button performs functions
in the following order:
switch on (high brightness) → switch to medium
brightness → switch to low brightness → switch off.
NOTE:
• This product features a "low battery" indicator.
If your light starts flashing intermittently and
then turns off, recharge the battery pack or use
another fully charged battery pack.
1
O
Battery-release
buttons
2
9
N
N
Publicidad
