Under no circumstances must the device be place in water or
other liquid, or come into contact with such. Do not use the device
with wet or moist hands.
Should the device become moist or wet, remove the mains plug
from the socket immediately. Do not reach into water.
Use the device only for the intended purpose.
The kettle is only to be used with the stand provided.
Special safety Instructions for this Machine
Use only cold water when filling.
The water level must under the MAX marks.
Switch the machine off before removing it from the base.
Always ensure that the lid is tightly closed.
The base and exterior that the lid is tightly closed.
The base and exterior of the machine must not become wet.
When the kettle is separated at the fault condition from the stand,
the thermal cut-out could be reset.
First use of the Machine
Before using the machine for the first time, water should be boiled
twice without any additives.
1. Unwind the lead from the base. Place the machine on a flat
surface.
2. Fill the kettle water. Do not overfill.
3. Place the kettle flush on the base.
4. Electrical connection
− Check whether the electrical voltage that you intend to use is the
same as that of the machine. Details are to be found on the label on
the base.
− Only connect the machine to a properly according to the
requirements of the rating label.
User's Manual
7
E N