Milwaukee LDM 45 Manual Original página 2

CONTENTS
Important safety instructions ...................................................1
Technical data.........................................................................2
Specified Conditions of Use ...................................................2
Error Code Table ....................................................................2
Overview.................................................................................3
Point of Measure ....................................................................4
Menu.......................................................................................5
Start ........................................................................................6
Length Measuring ...................................................................7
Surface Area Measuring .........................................................8
Total Area Measuring ..............................................................9
Volume Measuring ................................................................10
Indirect Height/Length Measuring (LDM 100 only) ...............11
Indirect Height Measuring (LDM 100 only) ...........................12
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Do not use the product before you have studied
the Safety instructions and the User Manual.
Laser Classification
WARNING:
It is a Class 2 laser product in accordance
with EN60825-1:2014 .
LASER
2
CONSUMER LASER PRODUCT
EN 50689:2021
WARNING:
Avoid direct eye exposure. The laser beam can cause flash
blindness.
Do not stare into the laser beam or direct it towards other
people unnecessarily.
Don't dazzle other individuals.
WARNING:
Do not operate the tool around children or allow children to
operate the tool.
The reflective surface could reflect the beam back at the
operator or other persons.
Keep extremities in a safe distance from the moving parts.
Carry out periodic test measurements. Particularly before,
during and after important measurements.
Watch out for erroneous measurements if the product is
defective or if it has been dropped or has been misused or
modified.
WARNING: Use of controls, adjustments, or the performance
of procedures other than those specified in the manual may
result in hazardous radiation exposure.
The laser distance measurer has limits of use. (Refer to the
"Technical data" section). Attempts to measure outside the
maximum and minimum range will cause inaccuracy. Use in
adverse conditions including too hot, too cold, very bright
sunlight, rain, snow, fog, or other vision restricting conditions
will result in inaccurate readings.
When the laser distance measurer is brought into a warm
environment from very cold conditions, or vice versa, allow it to
come to the surrounding temperature before use.
Always store the laser distance measurer indoors, avoid
exposing the tool to shock, continuous vibration or extreme
temperatures.
Always keep the tool away from dust, liquids and high humidity.
These may damage internal components or affect accuracy.
Do not use aggressive cleaning agents or solutions. Use only a
clean, soft cloth for cleaning.
Avoid heavy impact to or dropping of the measuring tool. The
accuracy of the tool should be checked before use if it has
been dropped or subjected to other mechanical stresses.
Any repair required on this laser product should be performed
only by authorised service personnel.
Do not operate the product in explosion hazardous areas or in
aggressive environments.
Do not dispose of waste batteries, waste electrical and
electronic equipment as unsorted municipal waste.
Waste batteries and waste electrical and electronic
equipment must be collected separately.
Waste batteries, waste accumulators and light sources have to
be removed from equipment.
Check with your local authority or retailer for recycling advice
and collection point.
According to local regulations retailers may have an obligation
to take back waste batteries and Waste electrical and
electronic equipment free of charge.
Your contribution to re-use and recycling of waste batteries and
waste electrical and electronic equipment helps to reduce the
demand of raw materials.
Waste batteries, in particular containing lithium and waste
Electrical and electronic equipment contain valuable, recyclable
materials, which can adversely impact the environment and the
human health, if not disposed of in an environmentally
compatible manner.
Delete personal data from waste equipment, if any.
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
1