Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTION MANUAL
PRODUCT PRESENTATION
This nut riveting machine allows rivets to be inserted
into metal plates, plastics, wood, fiberglass, etc. In ad-
dition, it is worth mentioning that it has a very flexible
design with its quick-change head.
TECHNICAL SPECIFICATIONS
Length
Weight
Dimensions
M3, M4, M5, M6, M8, M10, M12
Shank type
Working stroke
OPERATION
1.
Adjust the riveting machine according to the size
of the nut you want to work with. Open the handle
as far as possible to put the nut on the shank.
Manual riveting machine
2.
Screw in the nut to be reamed (A). To rivet the
nut, insert it into the hole where you want to ins-
tall it and close the handles to rivet the nut. Tigh-
ten the riveter handle until the nut is completely
tightened. (B)
Remachadora automática
Automatic riveting machine
52596
52597
410mm
440mm
1350g
1500g
Ergonomic handle
7mm
(A)
(A)
(B)
(B)
3.
To remove the tool, unscrew the chuck from the
riveter.
USE OF THE SCALE
Open the handles of the riveting machine and put the
nut you need to work on the shank. When you close the
handles to force the nut on, the scale chart will indicate
millimeters.
If the line marks 6mm, the final size of the nut will be
6mm.
Figure of the scale table
before working
The white line marks 0mm.
Figure of the scale table
in working process.
The white line marks 6mm.
RIVET SCREW REPLACEMENT
1.
Use the wrench (included) to loosen the nut and
remove it.
· 4 ·
REF. 52596/52597
Approximately 6mm
Publicidad
