Publicidad
Idiomas disponibles
Idiomas disponibles
12.Insertotherend of link (E)into hole in
front mowerbracket(H) andsecurewith
washer and retainerspring (J).
8. ATTACHREARLIFT LINKS(C) - Insert
rodend of linkassemblyintohole in trac-
tor liftshaft suspensionarm (L)and pivot
linkdownto mower.Liftrear cornerof
mowerand positionslot in linkassemMy
over pin on rearmowerbracket(D) and
securewith washer and retainerspring.
9. Repeaton oppositesideof tractor°
02933
13. Disengage
belt tension
rod (K) from lock-
ing bracket
(L).
14. Install belt onto engine
clutch pulley
(M).
mMPORTANT:
Check
belt for proper routing
in all mower
pulley grooves.
10. Turn steering
wheel
to position
wheels
straight
forward.
11. ATTACH
FRONT
LINK (E) - VVork from
left side of tractor. Insert rod end of link
assembly
through
front hole in tractor
front suspension
bracket
(F) and secure
with retainer
spring
(G) through
hole in
link located
behind the bracket.
15. Engage
belt tension
rod (K) on locking
bracket
(L).
CAUTION:
Belt tension
rod is spring
loaded.
Have a tight grip on rod and engage
slowly.
16. Raise attachment
lift lever to highest
position.
17. If necessary,
adjust gauge wheels
before
operating
mower
as shown
in the
Operation
section
of this manual.
02937
10
Publicidad
