Descargar Imprimir esta página

Aiwa CDC-X30MP Instrucciones De Manejo página 5

Autoestereo para disco com pacto
Ocultar thumbs Ver también para CDC-X30MP:

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting the beep tone
1 Turn off the unit.
2 Press and hold SEL until "BEEP" appears on the
3 Turn Jog dial to select ON or OFF.
4 Press SEL.
Setting the clock
1 Press and hold DSPL until the clock indicator
2 Press + (to set hour) or — (to set minute), and
then turn Jog dial.
3 Press DSPL.
Displaying the clock
1 Press DSPL.
To return to the former display, press DSPL again.
RADIO OPERATION
1 Press TU (TUNER) repeatedly to select the desired
band (F1.F2, F3, A1,orA2).
2* Press + (to move to higher frequencies) or — (to
move to lower frequencies) to tune in to a station.
"ST" appears on the display when an FM station is
broadcasting in stereo, and receiving conditions are
'Seek Tuning and Manual Tuning
• Press and hold + or — until Seek Tuning starts.
The unit locates a station automatically (SeekTuning).
To stop Seek Tuning, press + or — again.
• Press + or—repeatedly to search for adesired station
while increasing or decreasing the frequency step by
step (Manual Tuning).
Monaural mode
When FM signals become weak, or FM reception
Monaural mode to reduce noise.
Local mode allows you to tune in only to strong stations
during SeekTuning.
1 Press LO before you start seek tuning.
"LO" appears on the display.
To return to Distant mode, press LO again.
"LO" disappears and the unit tunes in to all receivable
stations.
Using preset stations
You must preset stations before you can tune in to a
station using preset station number buttons.
+/-
TU (TUNER) Preset station buttons 1 to (
PS/A.ME
F / IDS I
3
ENGLISH 4

Publicidad

loading