TRM 16 TRM 33 TRM 53 TRM 83 TRM 103
DAILY AND COMMON MAINTENANCES
•
For optimum performance of the device are advised to proceed with the scaling of resistance
every two years.
•
The deal, if you want to use the appropriate acids, can be made by crumbling limestone crust,
taking care not to damage the armor of resistance.
•
To ensure efficient water heater performance it is advisable to descale the resistance every
year.
•
The operation, if you don't want to use any acids, can be performed by removing the limescale
by hand, taking care not to damage the resistance.
•
The magnesium anode should be replaced every year, but in the case of hard waters or those
rich in chlorides, the state of the anode should be checked every six months.
•
To replace the anode, dismount the resistance and unscrew it from the clamp. Maintenance
tasks must be performed by an authorised technical service.
ELECTRICITY DIAGRAM
24