Defender 4CH Guia De Inicio Rapido página 6

DEVICE SETUP
PLEASE READ FIRST!
You must connect the DVR to a monitor/TV to complete the setup. We recommend verifying all accessories and
completing the DVR setup before installing the cameras. For the best viewing experience, we recommend using a
4K monitor/TV to view your footage.
1. CONNECT THE MONITOR, USB MOUSE, CAMERAS, MODEM/ROUTER, AND POWER SUPPLY TO THE DVR
BASED ON THE COLOR AND IMAGE LABELS:
Camera and BNC Cable: Connect the red and yellow BNC connectors to the camera. Attach the second
A
yellow connector to the DVR. Tip: When connecting the BNC connection, twist right to lock the metal
connection in place.
Camera Power: Connect the second red power connector from the BNC cable to the 4-way splitter and
B
power supply. Connect the 4-way power splitter and the camera power adapter to a power outlet.
*Repeat for 8 or 16 channel setups.
Monitor/TV: Connect the monitor/TV to the DVR with the HDMI cable.
C
USB Mouse: Connect the USB mouse to the DVR.
D
Modem/Router: Connect the Ethernet cable to the DVR and modem/router.
E
(NOTE: Wired Ethernet connection required. The DVR cannot connect to the modem/router via Wi-Fi)
DVR Power: Connect the DVR power cable to a power outlet.
F
USB Port
G
Audio Ports: Add audio recording to select cameras by connecting an external audio recording device (not
H
included). IMPORTANT: Vision AI cameras do not come with a built-in microphone.
A
B
6
Camera Tip: When installing the camera,
loosen the screws on the adjustable arm
and position the camera to ensure the best
possible camera angle. Tighten the screws
when finished.
A
B
C
D
Need Help? Visit DefenderCameras.com/support
E
H
7 5 3 1
8 6 4 2
C
Monitor/TV
(not included)
Power LED: Indicates the DVR is on.
A
Record LED: Data is being read or written to HDD.
B
Network LED: DVR is connected to a network.
C
USB Port
D
G
F
D