Publicidad
Step 3
Secure front stretcher G and side
stretchers E & F to the legs with screws
❼ using a Phillips head screwdriver (not
included).
NOTE: Ensure the holes in stretchers are
facing up so that the screws ❼ will not
show once chair is upright. Once all bolts
have been installed, apply a downward
force on the chair. This will help all legs to
sit flush on the floor. Fully tighten all bolts
installed in previous step.
Repeat step 1&2 & 3 to assemble the
other chair.
8
Publicidad
