Sonus Faber DUETTO Guia De Inicio Rapido página 12

6.2
Android™ Devices
• Install/Update the Google Home app
• Open the Google Home app
• Select + at the top left
• Select Set-up a new device
• Follow the wizard to set up Wi-Fi
6.3
Ethernet • Connect your router to Duetto via Ethernet cable
For further information and troubleshooting, please view the interactive manual
and installation video at: www.sonusfaber.com/en/products/Duetto/
7 PLAY MUSIC
7.1
Streaming Apps
Make sure the Control line colour is white. Otherwise, please go to section 7.2.
Turn on the chosen app and select Duetto with the required speaker.
The Control line coloured light will now change according to the streaming service used.
AirPlay (white)
Chromecast built-in (yellow)
Spotify (green)
Tidal (light blue/turquoise)
Roon (purple)
22
7.2
Select the input
Change the input until the Control line indicates the required input colour.
Scroll from the centre to the right of the Control line until the required input colour
appears.
The input can also be changed remotely using the remote control.
7.3
Bluetooth
• Change the input until the Control line starts to flash blue
• Select search for a new device in your device Bluetooth settings
• Select Duetto-xxxxxx from the list of available Bluetooth devices
• Duetto is ready to play music when the blue Control line light stops flashing
7.4
Physical Inputs
Change the input until the Control line indicates the required input colour
HDMI (orange)
Optical (fuchsia)
Line/Phono (magenta)
Make sure the analog device is correct set up.
Device requirements::
• HDMI ARC: select the TV PCM/Stereo signal set-up
• Phono stage: Cartridges (MM) with output from 2.4mV to 5.0mV. Make sure you select
Phono in the input board on the back of Duetto. Line In is reserved to high level signals
such as CCD players
• Optical: use the Optical option. Make sure the TV is set up with a PCM format digital
audio signal
23
EN