Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
The primer bulb was not pressed enough
The fuel is old (over 30 days) and/or improperly mixed
SOLUTION
Press the primer bulb 10 times or until fuel is visible
Drain the fuel tank and add fresh, properly mixed fuel
The fuel is old (over 30 days) and/or improperly mixed
Drain the fuel tank and add fresh, properly mixed fuel
The fuel is old (over 30 days) and/or improperly mixed
Drain the fuel tank and add fresh, properly mixed fuel
The fuel is old (over 30 days) and/or improperly mixed
The spark plug is not working properly
Drain the fuel tank and add fresh, properly mixed fuel
Refer to Maintaining the Spark Plug
The saw chain tension is too tight
The guide bar groove and oil passages are dirty
The saw chain tension is too tight
The guide bar and saw chain are damaged
The chain brake is engaged
The saw chain is dull
Adjust the saw chain tension
Clean the guide bar and oil passages
Adjust the saw chain tension
Inspect the guide bar and saw chain for damage. Replace them if
necessary
Disengage
the chain brake
Sharpen
or replace
the saw chain
28
Publicidad
