Samsung The Frame LS03 Serie Manual Del Usuario página 27

Video Apps problems (Youtube etc)
• Change the DNS to 8.8.8.8. Select
DNS setting > Enter manually > DNS Server > enter 8.8.8.8 > OK.
• Reset by selecting
The TV remains on or does not turn on automatically.
• If the surrounding area is too dark or bright, the motion sensor may not work normally. The performance
of the motion sensor may be affected by the installation environment (height, tilt, obstacles). If the clothes
you wear or your skin colour is similar to the surrounding shading, the motion sensor may not work properly.
• The TV responds to all visual changes around it (lights, displays, dogs, out-of-window changes, and other
occurrences). You can adjust the response level by adjusting the sensitivity of the motion detector.
( > Art > Settings > Motion Detector)
Precautions when using Art mode
• The motion sensor is located at the bottom of the TV. Do not block the sensor at the front of the TV. The
motion sensor as well as the brightness and colour tone of the screen can be affected.
• Art mode uses algorithms to minimise image burn-in that can be caused by displaying still images on the
screen for long periods of time.
• The performance of the sensor may vary depending on the TV installation and operating environment.
– The screen brightness and colour tone may be affected depending on the colour of the floor on which
the TV stands.
– In an environment where special light sources other than standard light sources (halogen, fluorescent)
are used, the sensor's motion recognition performance may vary depending on the positions, types, and
number of the light sources.
– If the area around the TV is too dark or bright, the screen brightness may be limited or the sensor may
not work normally.
– If the TV is installed too high or too low, the sensor may not work normally.
– The motion sensor may sense motion from a flashing LED, a pet, a car moving outside the window, or
other occurrence and start operating.
• Depending on the Auto Power Off (
settings, the TV may turn off when there is no user input in Art mode, such as inputs from the remote
control.
•
> Settings > General > System Manager > Time > Sleep Timer and Off Timer function does not work in
Art mode.
• Settings > General > System Manager > Auto Protection Time function does not work in Art mode.
>
> Settings > General > Network > Network Status > IP Settings >
> Settings > Support > Self Diagnosis > Reset Smart Hub.
> Settings > General > Eco Solution > Auto Power Off) function
English - 27