Descargar Imprimir esta página

Little Seeds 6849196BRU Manual Del Usuario página 34

Ocultar thumbs Ver también para 6849196BRU:

Publicidad

Step 26
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture ! pover.
To prevent ! pover:
* Install ! pover restraint provided
* place heaviest items in the lowest
drawers
* Unless specifi cally designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a ! me
Use of ! pover restarints may only
reduce, but not eliminate the risk
of ! pover
OPTION 1: A" achment into a wall stud (preferred method)
Using a stud fi nder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this loca! on.
To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the safety
bracket into the stud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully
! ghened in step 5.
OPTION 2: A" achment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then
move your unit aside.
Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole un! l it is fl ush.
Move your unit into loca! on and fasten the wall bracket to the wall anchor with the screw.
Tighten the screw that was not fully ! ghtened in step 5.
li• leseedskids.com
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
a• ach the safety bracket.
34
TM
hole
stud
wallboard

Publicidad

loading