Bimar TO.23V-2L Folleto De Instrucciones página 21

Internal light and signal lamp: they are always on when the oven is in function
The oven is also complete with the following accessories:
handle (4) for the oven tray and shelf
-
stainless steel shelf (5): fit into the runners at the appropriate height If the shelf is hot, use
-
the handle provided or oven gloves when removing it.
oven tray (6): fits into the runners; use the handle provided or oven gloves when removing
-
the tray. If containers are used, ensure that they are heat-proof: do not use containers
which may become misshapen, catch fire or contaminate foods.
crumb tray (7): fit this underneath the bottom heating elements; if it is not fitted or
-
incorrectly positioned, the worktop underneath will overheat. This tray collects crumbs or
any overflows of liquids. Do not use the oven unless the crumb tray is in place.
First use
Operate the oven empty, to burn off the "new smell" and any oils left by the production
process. Wash and dry the shelf, oven tray and crumb tray and fit them in place.
Connect the plug to the power socket and set:
the selector knob on "
necessary, repeat this operation a second time. At the end of the operating cycle, before
removing the accessories remove the plug from the power socket and wait for the oven to
cool.
Use
For some foods, the oven should be preheated to the chosen temperature. Cooking times
depend on the type and quantity of foods, their temperature and personal preferences. When
cooking frozen foods, refer to the recommended times on the product packs.
• Connect the plug to the power socket.
• Fit the crumb tray in place (underneath the bottom heating elements).
• Fit the shelf onto the runners at the appropriate height.
• Make the following settings:
turn the thermostat knob to the suitable temperature
-
turn the selector knob to the suitable cooking mode
-
prepare the foods for cooking in the oven tray, on an oven dish or on the shelf, then,
-
after heating the oven if necessary, place them inside at the appropriate height and close
the door.
Timer knob (3). This sets the oven's operating time (max
60 minutes). Turn the knob clockwise to the time value
required: when the set time ends, the oven switches off,
the knob gradually returns to the "0" position (also
sounding a beeper) and the internal fan and light also
go out. To stop the cycle, simply turn the knob anti-
clockwise to the "0" setting. The oven will not come on
with the knob turned to "0". To use the oven without
the timer, turn the timer anti-clockwise to the manual
position "
"0" (off).
", the thermostat knob on "230" and the timer knob on "20". If
21/60
"; to switch off the oven, turn the knob to