Publicidad
Idiomas disponibles
Idiomas disponibles
Die Grinder, extra short, 90° angle, 126 mm
TECHNICAL DATA
Collet: 6 mm
Idle speed: 18000 rpm
Operating pressure: 6.2 Bar (90 PSI)
Air consumption: 79.6 L/min
Compressed air connection: 1/4"
Sound pressure level: LpA= 89 dB(A)
Sound power level: LwA= 103 dB(A)
Vibration level: ahd= 4.3 m/s² | K= 0.92 m/s²
Length: 126 mm
Weight: 475g
ATTENTION!
Read, understand and follow all instructions and safety instructions before commissioning this air tool.
Failure to do so may result in injury, damage to property and loss of the warranty. Keep this user
manual in a safe place. Also, when passing the product on to a third party, also hand over this user
manual.
INTENDED USE
This die grinder is a compact, air-powered tool for manual use. It is suitable for removing rust and
grinding of different materials.
SAFETY INFORMATION
•
Ensure that the unit is turned off before connecting it to the compressed air supply.
•
Keep children and other persons away from the work area.
•
When using air tools, always wear the necessary protective clothing, such as approved safety
glasses and a suitable dust mask.
•
Comply with the safety requirements, workplace regulations, and occupational health and
safety regulations of the respective country or field of application, e.g. the German accident
prevention regulations.
•
Only use accessories designed for use with air tools and only use original spare parts.
•
Disconnect the tool from the compressed air supply before installing accessories or
performing maintenance.
•
Always use the air tool with common sense, rested and concentrated.
•
Do not wear loose clothing or jewellery that can be caught by moving parts and may cause
injury.
•
Only operate the air tool at a safe distance from yourself and other persons.
•
Disconnect the air tool from the compressed air supply when not in use and store it in a dry
place that is not accessible to children.
•
Never allow the air tool to run at maximum speed unloaded.
•
Do not make any changes to the air tool.
•
Perform a visual inspection on the device before use. If a fault or defect is detected, the
device may only be used after repair.
•
Never use the air tool in potentially explosive atmospheres.
•
Ensure that no materials can ignite as a result of flying sparks.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 9657
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
