Publicidad
Idiomas disponibles
Idiomas disponibles
Usage
1.
Install the filter bag on the fan. Do it carefully. The bag must be put on the
entire surface of the fan. Before using, spread the filter bag evenly.
2. Make sure that the filter bag is fixed evenly and not jammed.
3. Before switching on, make sure that there are no foreign objects between
fan blades.
4. Insert the plug into the 220V electrical mains. Use the switch located on the
wire to turn it on and off.
5. After the first switching on, it is recommended to lift the dust collector and
make sure that the bag is puffed and nothing disrupts the air flow.
6. Work in the area of the dust collector fan impeller approximately 1.5 cm away
from the edge of the grill to the center.
Safety measures
•
Do not allow hands or foreign matter entering into the moving blades of the
fan.
•
When you need to switch the dust collector off, pull the plug, not the
electrical cord.
•
Do not use it with wet towels and water.
•
Do not use the cable as a handle for carrying.
•
Disconnect the dust collector from the outlet during every bag handling
operation.
Care
Keep the dust collector body clean. Regularly remove dust from the blades and
the base of the fan impeller using a soft brush or compressed air. Do not use
solvent or other aggressive liquids (e.g. lacquer removal liquid) to clean the
device.
The dust collector includes a multi-layer filter bag for collecting dust. Its purity
determines the efficiency of the device. Clean dry bag must be used for the dust
collector to provide correct functioning.
Change the filter bag for a clean one before starting the working day. Wash
the bag to clean it from dust. Manual or delicate machine washing with water
temperature of not more than 40 degrees is permitted. During active operation it
is recommended to change the filter-bag at least once a day. Service life of bag
is 1.5-2 months.
ENG
8
Publicidad
