Publicidad
Idiomas disponibles
Idiomas disponibles
Fuel
The engine must run on a mixture of unleaded 95 petrol
and 2-stroke engine oil in the ratio of 1: 30 (1 liter of oil
for 2 stroke engines for each 30L of petrol).
Place the 2-stroke engine oil in a fuel-approved bottle;
1. Add petrol to 2-stroke engine oil;
2. Place the tank cap and shake it thoroughly to mix the
oil with petrol;
Unsuitable fuels or with a different ratio than
recommended may lead to irreversible damage to the
engine. Petrol or oil of low quality can damage the
engine, gaskets, hoses and the fuel tank.
Keep the fuel mixture in proper and adequate
tanks in a safe, dry, cool place protected from
sunlight.
Fuel mixture ages; mix only the amount
needed for a few weeks. Do not store or use fuel with
more than 30 days.
Shake the mixture fuel bottle before refueling the fuel
tank.
Pressure may form inside the tank, for this reason
it shall be opened carefully. Avoid direct skin
contact and inhalation of flammable vapours.
When refilling the fuel tank, do not add petrol above the
maximum level of the filler cap.
MAINTENANCE INSTRUCTIONS
Before any maintenance or cleaning work, place
the equipment on a levelled surface, switch off
the engine and pull out the spark plug cap.
Never touch the exhaust, spark plug, or other
metal parts of the engine while the engine is
running or immediately after turning off the engine.
This can lead to severe burns or electric shock;
Sharpening the cutting blades
For maximum performance, to avoid the risk of blade
thrust/ kickout and to extend the service life of the
brush cutter, always use blades with sharp teeth. A
badly sharpened or damaged blade increases the risk of
an accident.
42
See the blade packaging for proper sharpening
instructions. Use a flat file to sharpen the blades.
Sharpen all edges evenly to maintain the balance of the
blade.
Never attempt to straighten a deformed blade so that it
can be reused.
Always discard
bent, twisted, cracked, broken or damaged in any other
way.
Air filter cleaning
Dirty air filters reduce engine power, increase fuel
consumption and make starts more difficult.
1. Move the CHOKE lever until it touches the top. This
prevents the waste intake in the carburetor when the
filter element is removed;
2. Unscrew the fixing screw, remove and clean the air
filter cover;
3. Remove the filter element cover and blow it with
compressed air until it is completely clean. If it does not
allow effective cleaning or is damaged, replace it;
4. Insert the filter element and assemble the remaining
components in reverse order of disassembly;
The use of a dirty filter will limit the air flow in the
carburetor affects the performance of the
appliance;
Fuel filter cleaning
1. Empty the fuel tank;
2. Remove the fuel line hose from inside the tank and
remove the filter;
3. Blow the filter with compressed air until it is
completely clean. If it does not allow effective cleaning
or is damaged, replace it;
a blade
that
is
Publicidad
