Safety Procedures - REED PLAS In-Line Rotary PLAS1 Manual Del Operador

SHARPENING
Dull cut-off blades, if not chipped
or broken, can be sharpened by
any machine shop that has silicon
carbide or diamond wheels. Ordinary
grinding wheels will not effectively
grind carbide. The bevel blade,
made of hardened tool steel, can be
sharpened with conventional grind-
ing equipment.
LUBRICATION
No lubrication is needed and the cutter parts should not be oiled. Dry graphite
occasionally applied to the moving parts will assure long life and easy operation.

SAFETY PROCEDURES

• OPERATE TOOL UNDER OSHA AND OTHER APPLICABLE SAFETY STANDARDS.
Figure 4
NOMINAL PIPE CUTTER SIZE
6"
8"
10"
12"
14"
15"
16"
18"
20"
22"
24"
27"
28"
For beveling over 12" diameter plastic pipe, the "D" unit, which has the bevel tool-holder at a different angle from the
"A" unit, must be used. The "A" unit can be used as a substitute for the "C" unit on larger than 12" diameter pipe.
4
Handtag
mm PIVOT LINK SECTIONS
160 A & C
200 A & C
250 A, B & C
315 A, B & C
355 D* & 2 - C's
380 D & 2 - C's
400 D & 2 - C's
450 D, B & 2 - C's
500 D & 3 - C's
560 D & 3 - C's
600 D, B & 3 - C's
700 D & 4 - C's
800 D & 4 - C's
Skärmaskinsmut-
trar*
"i denna figur,
finns det 8 mut-
trar.
HOLES
Inner holes
Outer holes
Inner holes
Outer holes
1 inner, 1 outer
Outer holes
Outer holes
1 inner, 2 outer
2 inner, 1 outer
Outer holes
3 inner, 1 outer
2 inner, 2 outer
Outer holes