Publicidad
Idiomas disponibles
Idiomas disponibles
10. Remove adjusting keys and wrenches.
Check that keys and adjusting wrenches are removed from the tool or machine work
surface before starting work.
11. Stay alert.
Watch what you are doing, use common sense. Do not operate any tool when you are tired.
12. Check for damaged parts.
Before using any tool, any part that appears damaged should be carefully checked to deter-
mine that it will operate properly and perform its intended function. Any part that is damaged
should be replaced.
13. Replacement parts and accessories.
When servicing, use only identical replacement parts. Use of any other parts will void the
warranty. Only use accessories intended for use with this tool.
14. Do not operate tools if under the influence of alcohol or drugs.
Read warning label on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
The warnings, cautions and instructions discussed in this instruction ma-
WARNING
nual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by
the operator.
OPERATING INSTRUCTIONS
Before operating:
1.
Before operating your Load Leveler, check for damaged parts. Before using any tool, any part
that appears damaged should be carefully checked to determine that it will operate properly
and perform its intended function.
2.
Do not exceed the tools, maximum capacity (750KG). Never force the tool or attachment to do
the work for a larger industrial too. It is designed to do the job better and more safety at the rate
for which it was intended.
3.
Do not try to use inappropriate attachments in an attempt to exceed the tool's capacity.
FR
AVERTISSEMENT ET LA SÉCURITÉ
Lorsque vous utilisez l'outil, les mesures de sécurité de base doivent
ATTENTION
toujours être suivies pour réduire le risque de blessures et de dom-
mages matériels. Lisez toutes les instructions avant d'utiliser cet outil!
1.
Gardez conditions de la zone de travail.
Les endroits encombrés favorisent les accidents.
2.
D'autres conditions de la zone de travail.
Ne pas utiliser des machines ou des outils électriques dans des endroits humides ou mouillés.
Ne pas exposer à la pluie. Garder la zone de travail bien éclairée.
3.
Eloignez les enfants.
Les enfants ne doivent jamais être autorisés dans la zone de travail. Ne les laissez pas mani-
puler des machines, des outils ou des rallonges.
4.
Stocker les équipements ralentis.
Lorsqu'ils ne sont pas utilisés, les outils doivent être stockés dans un endroit sec pour empê-
cher la rouille. Toujours verrouiller en place d'outils et de garder hors de portée des enfants.
· 6 ·
Publicidad
