Ingersoll Rand BIDS7 Manual De Uso página 5

Manual lock
The balancer is fitted with a manual-locking system (Fig.2): push and turn the pin (6) (Fig.2) by 90° (position A) to block drum rotation;
push and turn pin (6) (Fig.2) by 90° (position B) to allow normal operation.
Use the locking system ONLY with load hanging;
If the balancer cable is not fully wound and no load is hanging, DO NOT intervene and contact the after-sales
assistance centre immediately.
OPTION "RI", insulated rotary suspension (Fig.5)
Permits to electrically insulate the load hung on the balancer, e.g. in the case of suspension of welding devices and/or turn the
hanging tool freely without twisting the cable.
Always comply with the safety regulations relative to the electrical equipment.
Installation: insert the snap-hook (29) into the pin (E) of the rotary suspension Insert the cable thimble (28) into the pin (F); insert
the split-pin (D) and deform it.
M
aIntenance
Maintenance may be carried out only by skilled and authorized personnel.
Use original INGERSOLL-RAND spare parts only. When requesting spare parts, the Customer should kindly contact the supplier of
the balancer or the manufacturer directly, specifying the equipment's identification data printed on the plate.
Do not make any modification to the rope group and, specifically, DO NOT SHORTEN the rope: if needed, please get in touch with
the supplier or the manufacturer directly.
Never disassemble the balancer. Maintenance is to be carried out only by skilled, authorized personnel.
W
arranty
The use of non-original INGERSOLL-RAND spare parts will negatively affect safety and performance and, in any case, it will void
the warranty.
The rope and the drum-spring are not covered by warranty.
d
Isposal
At the end of the work life of the balancer, proceed as follows:
- Rewind the rope completely
- Unhook the load from the balancer
- Unhook the balancer from the primary and safety connections.
- Proceed to fully discharge the balancer spring.
Once the balancer has been discharged, it must be disposed of complying with the rules and regulations in force.
5
EN