Telstar TAD001210HV Manual De Instrucciones página 12

POWER ON
When the Power switch is on the left side, Slide it to the right side to power on. (Note: If the power switch is on
the right side and the headphone is off, slide the power switch back to the left side before sliding the power
switch to the right side to turn the headphone on. Bluetooth connection Follow the steps (Please confirm that
your phone is built-in Bluetooth function)
1.
Slide the power switch to the right side, LED alternately flashes alternately red and blue with a voice prompt.
2.
Activate the Bluetooth function and search for "HAVIT 166" referring your phone instructions.
3.
Manually click "HAVIT 166" to connect. If the indicator stops flashing and the connection is successful with
a voice prompt.
4.
Pairing mode can last 10 minutes. If you miss the pairing time, you need to restart the device and operate
follow the procedural steps mentioned above.
5.
When turning on, the headphone can automatically connect the last device hat you had paired. (Make
sure the Bluetooth function of the last paired device has been on when the headphone is entering the pairing
status.)
6.
The headphone will automatically turn off, if the headphone has no connection or lose the connection for
10min
Power off
Slide the power switch to the left side, the headphone will be off
Answer incoming calls
Short press the MFB to answer incoming calls Tip: Since some mobile phones default to answer calls via their
own receiver, please re to the instructions of your phone and set on your phone
End the call
Press the MFB once to end the current call
Refuse incoming calls
Press the MFB for 2 seconds when theie comes a call.
Last number redial:
Double press the MFB to redial the last calling number Music playing:
1 Play/Pause:
Short press the MFB,
12
WIRELESS HEADPHONE
TAD001210HV