Specifications; All Models; Dimensions - Phonic XP6000 Manual Del Usuario

SPECIFICATION
Stereo Mode (both channels driven)
8 ohms FTC 20Hz-20kHz 0.1% THD
4 ohms FTC 20Hz-20kHz 0.1% THD
2 ohms FTC 20Hz-20kHz 0.1% THD
8 ohms EIA 1kHz 0.1% THD
4 ohms EIA 1kHz 0.1% THD
2 ohms EIA 1kHz 1% THD
Bridge Mono Mode
8 ohms FTC 20Hz-20kHz 0.1% THD
8 ohms EIA 1kHz 0.1% THD
4 ohms EIA 1kHz 1% THD

All Models

Distortion (SMPTE-IM)
Distortion (Typical) 20Hz-20kHz: 10dB
below rated power
Distortion (Typical) 1kHz and below: full
rated power
Frequency Response
Damping Factor
Noise (unweighted)
Input sensitivity
Controls (Front)
Control (Rear)
Voltage Gain
Input Impedance
Indicators
Connectors Input
Connectors Output
Cooling
Amplifier Protection
Load Protection
Output Circuitry
Power Requirements (depends on region)
Circuit Breakers
Dimensions (WxHxD)
Weight
XP6000
20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB
5Hz to 50kHz, 8 ohms, LF filter bypassed, +0/-3 dB
100 dB below rated output (20 Hz to 20kHz, 8 ohms load)
1.42 Vrms for 1000 watts into 8 ohms
AC power switch, Ch1 & Ch2 gain control with 41 detents
12-pole DIP switch featuring high pass filter on/off, high pass filter 30/50Hz, Clip Limiter
on/off control for each channel and switches for selecting Stereo, Parallel, or Bridge
Mode. Push-button circuit breaker for each channel. Switch for Grounding / Floating.
20k ohms balanced, 10k ohms unbalanced
Power-On, Bridge, Parallel, CLIP/LIM, Protect,
and LEDs for -10dB, -20dB and -40dB signal LEDs
XLR, 1/4" TRS jacks and barrier strip
Binding posts and speakon outputs (CH1 speakon wired for biamp)
Continuous variable-speed fan, rear-to-front air flow
Short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into mismatched loads
ON/OFF muting, DC fault output crowbar
100-120VAC, 220-240VAC (+/- 10%), 50/60Hz (factory configured);
120V model requires 20 amp
Two (one for each channel): 100 and 120V models: 20 amp / 230 V models: 10 amp
482.6 x 133.5 x 376mm (19" x 5.2" x 14.8")
XP6000
1420W
2180W
2600W
1500W
2400W
3000W
4000W
4800W
6000W
<0.02%
<0.02%
<0.02%
>250 @ 8 ohms
41x (36dB)
Class H Amplifier
28.2 kg (62.2 lbs)
5