Tab. Height adjustment
1
IV. Heated table top*
1. Turn on the table top heating by pressing the button ON/OFF on the remote control (1).
2. Set the requested temperature by pressing the buttons located below the HEAT '+' or '-' (2) ,
in the range from 1 to 10. Heated table top warms up to a maximum temperature of
3. Set the auto-off function by pressing the buttons located below the AUTO OFF '+' or '-'(3),
in the range from 1 to 10. The digits represent the number of hours. By default, the heating will turn
off after 1 hour. If we set 3, for example, the heating will automatically switch off after 3 hours, etc.
2
8
2
3
4
Heat
Auto Off
3
On/Off
1
Tables
Description of activities
eSpirit
Aura
Eden
Elza
Olivia
Verona II
Altus, Vesta
Luna Light
Luna Light Mini
Torina
Fairlane Therma-
Top Cinnamon
NOTE:
When the heating in the tabletop switches off automatically,
you can reset it by pressing the button ON / OF (1). If the letter
'F' displays on the remote control(4), disconnect the remote
control from the table and the power supply, wait at least 20
seconds and reconnect it.
1. Unscrew a knob.
2. Remove the mobile leg from the
fixing screw, move the mobile leg
to the chosen position.
3. Tighten the knob.
1. Unscrew a knobs.
2. Remove the mobile leg from the
fixing screw, move the mobile leg
to the chosen position.
3. Tighten the knobs.
1. Drive in the locking pin.
2. Remove the mobile leg to the
chosen position.
3. Drive out the locking pin.
1. Unscrew a knobs.
2. Remove the mobile leg from the
fixing screw, move the mobile leg
to the chosen position.
3. Drive out the locking pin.
32°
* regards table Therma Top
C.