Publicidad
Idiomas disponibles
Idiomas disponibles
Contents
1
Operating Elements and Connections . . 12
1.1 Transmitter SIEM-111T . . . . . . . . . . . . . . . . 12
1.2 Receiver SIEM-111 / R2, earphones IE-1 . . 13
1.3 Display on the receiver . . . . . . . . . . . . . . . . 13
1.4 Display on the transmitter . . . . . . . . . . . . . . 13
2
Safety Notes . . . . . . . . . . . . . . . . . . . . . . . 13
3
Applications . . . . . . . . . . . . . . . . . . . . . . . 14
3.1 Conformity and approval of the transmitter 14
4
Setting the System into Operation . . . . . 14
4.1 Setting up the transmitter . . . . . . . . . . . . . . 14
4.2 Connecting the transmitter . . . . . . . . . . . . . 14
4.3 Power supply of the receiver . . . . . . . . . . . 15
4.4 Connecting the earphones . . . . . . . . . . . . . 15
4.5 Selecting the transmission frequency
and receiv ed frequency . . . . . . . . . . . . . . . 15
4.5.1 Adjusting the frequency on the receiver . . 15
4.5.2 Adjusting the frequency on the transmitter 16
5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.1 Adjusting the input level on the transmitter . 16
5.2 Monitoring the transmitter via headphones 16
5.3 Inserting the earphones . . . . . . . . . . . . . . . 16
5.4 Adjusting the volume and the balance . . . . 17
5.5 Further optional features of the receiver . . . 17
5.5.1 Menu item "Stereo/Mono" . . . . . . . . . . . . 17
5.5.2 Menu item "Hi Freq. Boost" . . . . . . . . . . . 17
5.5.3 Menu item "Limiter" . . . . . . . . . . . . . . . . . 17
5.5.4 Menu item "Key lock" . . . . . . . . . . . . . . . 17
5.5.5 Menu item "Contrast" . . . . . . . . . . . . . . . 18
5.5.6 Menu item "Light time" . . . . . . . . . . . . . . 18
5.6 Fastening the receiver . . . . . . . . . . . . . . . . 18
5.7 Further optional features of the transmitter 18
5.7.1 Operating mode MONO/STEREO . . . . . 18
5.7.2 "LOCK" function . . . . . . . . . . . . . . . . . . . 18
5.8 Switching off the units . . . . . . . . . . . . . . . . . 18
6
Specifications . . . . . . . . . . . . . . . . . . . . . . 19
12
All operating elements and connections described
can be found on the fold-out page 3.
1 Operating Elements and Connections
1.1 Transmitter SIEM-111T (figs. 1 and 2)
1 POWER button
2 LC display (¡ chapter 1.4)
3 Button + for switching over a function or for increas -
ing a value in the adjusting menu; when the button
is kept pressed, the value will increase continu -
ously
4 Button SET for calling the adjusting menu, for se -
lecting the menu item, and for confirming the
adjustments made
5 Button - for switching over a function or for decreas-
ing a value in the adjusting menu; when the button
is kept pressed, the value will decrease continu -
ously
6 VOLUME control for adjusting the input level
7 Volume control MONITOR for headphones con -
nected to the jack (8) or (9)
8 3.5 mm jack
for connecting stereo headphones
(impedance 2 × ≥ 16 Ω)
9 6.3 mm jack
for connecting stereo headphones
(impedance 2 × ≥ 16 Ω)
10 Mains input jack for connection to 100 – 240 V~ via
the mains cable supplied
11 Fuse holder; replace a burnt-out fuse by one of the
same type only!
12 Feed-through output LOOP OUT for channel CH. 1
for routing the input signal at the jack LEFT / CH. 1
IN (14) to the input of another audio unit, e. g. an -
other transmitter
13 Feed-through output LOOP OUT for channel CH. 2
for routing the input signal at the jack RIGHT /
CH. 2 IN (15) to the input of another audio unit, e. g.
another transmitter
14 Combined XLR/6.3 mm jack LEFT / CH. 1 IN for
balanced connection of the left channel of a stereo
signal source (e. g. mixer, CD player) or a mono
signal source
15 Combined XLR/6.3 mm jack RIGHT / CH. 2 IN for
balanced connection of the right channel of a ster -
eo signal source (e. g. mixer, CD player) or a mono
signal source
16 BNC jack for the antenna supplied
Publicidad
